User login |
pccardctl (8)
PCCARDCTL(8) PCCARDCTL(8)
NAME
pccardctl - PCMCIA card control utility
SYNOPSIS
pccardctl [-V] command [socket]
DESCRIPTION
pccardctl is used to monitor and control the state of PCMCIA sockets.
If a socket number is specified, the command will be applied to just
one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is
executed by an unpriviledged user, only the informational commands are
accessible.
COMMANDS
status
Display the current socket status flags. --not yet implemented
config
Display the socket configuration, including power settings, inter-
rupt and I/O window settings, and configuration registers. --not
yet implemented
ident
Display card identification information, including product identi-
fication strings, manufacturer ID codes, and function ID codes.
Not yet implemented for cardbus cards. Use lspci instead.
info
Much like the ident command, but its output is formatted as a
series of Bourne-stype shell variable definitions for use in
scripts. Not yet implemented for cardbus cards.
suspend
Shut down and then disable power for a socket.
resume
Restore power to a socket, and re-configure for use.
eject
Notify all client drivers that this card will be ejected,
then cut power to the socket.
insert
Notify all client drivers that this card has just been
inserted.
OPTIONS
-V Show version information and exit.
AUTHOR
Daniel Ritz - <a href="mailto:daniel.ritz@gmx.ch">daniel.ritz@gmx.ch</a>
based upon the original cardctl man page by
David Hinds - <a href="mailto:dahinds@users.sourceforge.net">dahinds@users.sourceforge.net</a>
pcmciautils 2005/10/22 PCCARDCTL(8)
|